Multi-load Harmonic Power Saver

Multi-Load Harmonic Power Saver

Zig Zag winding is adopted and it makes our technology very unique.

Which is a patented product, they get rid of undesired harmonic currents,

unbalance currents and reactive power.

Although our products have got 2-3% of voltage drop at the secondary

part in

due to the structure's charteristic of winding but output performance

mostly

constant and it is even benefit to keep the performance

on the above.

Key Benefits of Geetech Power Saver

Reduces

up to 18% of the

electric power consumption

Improve power factor

p to 20%

Harmonics

As electronic power controllers are used more and more, a rapid

rise in nonlinear loads have been triggered, and the resulting

harmonics has caused unexpected electric disturbances in the

power supply system.

Unbalance

According to the codes and standards of the US National Manufacturers'

Association,

voltage unbalance of 3.0% results in approximately a 10%

decrease

in the

capacity of the inductive motor; and

- A voltage unbalance

of 4.4% leads to approximately a 20% decrease in the

capacity

of the

inductive motor.

Reactive Power

An increase in reacti

ve power causes a reduction in transmission capacity

compared to

app

rent power, resulting in a transmission loss. Accordingly,

there

is a naturally increasing loss in the electric generator or transformer.

Then

offset

compensations generally taken as the action to improve power

factor by

using another

reactive power of an opposite direction.

The

improvement

power factor provides many

cost -effective advantages

such

as a reduction in

electricity rates and a decrease in power consumption

and

transformer capacity.

Increase life and efficiency of your equipment

Improve product quality

Outstanding return of investment (1.5 - 3 years )

Increase your competitive advantage

result, we save the

expense and time required

install the unit.

Furthermore, it will be more simple

for future maintenance.

Semi-Permanent Life Cycle (25-30 years)
2 years guarantee for transformer
System's Smoothing Effect as Filter
Power Saver play as a filter by being installed to an existing unit, which
Improves power quality and protects the equipment.

Completely different from the existing power saver, Geetech Harmonic

Power

Saver (GHPS) bring you the most benefit and energy efficiency.

Motor RPM and heating performance under "Saving mode" are mostly

same

under "By Pass mode" thanks to the real consuming current

Ohm’s Law ; E = I×R ⇒ P = E×I = I² ×R The current in an electrical circuit is

directly proportional to the electro motive force and inversely proportional

to the resistance. So that, electrical consumption depends on the Resistance

which obstructs the electrical flow.

GeetechTM -Ener

eeper

reduces the impedance like harmonics, unbalance and reactive

power which are generally generated during the operation of electrical equipments,

improves the current flow, and finally saves power consumption.

The coil winding moves from a leg to a neighboring leg and its direction goes down

in the first leg and getting up in the second leg and it finally gets back to the first leg

with its down direction again. It's applied to each leg in zig zag way with its opposite

dir

ection.

Capacitor Type Power Saver

These kinds of products mainly control power on motor, being advertised

known.

However, their products are needed to be customized and work

thes

kinds of

products should be installed on each motor

product respective

for the best result.

These products improve power factor but it hardly have an effect on real

Watt

saving. The reason is power factor and Watt are no direct

interrelations.

Plus,

the most of places which expects to improve power

factor have

capacitor banks

already.

Voltage Drop Models

These products are not real power savers. Voltage down means Watt

down

but

workability get worse. A microchip controller is included in them.

Patented Technologies

10-0428458 Power Saving Apparatus

Apr 2004

10-0428459 An Apparatus for Reducing Harmonics

pr 2004

20-0336886 Power-Saving Apparatus

Dec 2003

Out Door Type
Harmonic Transformer

armoni

Mitigate Harmonic & Solution

Step 1. Diagnostic of the power control system - Free

Step 2. Install the GEETECH Power Saver

You can save up to 18% of the total power consumption depend on your devices.

Step 3. Installation or upgrade of the necessary devices for lamps, elevators, escalators, chillers, HVAC and etc..

Only energy that is being wasted, can be saved.

Geetech Harmonic Power Savers are a relatively new tool being used by some power quality professionals to rid

commercial and industrial facilities of the power quality problems associated with harmonic currents. Harmonics are

imposed on distribution systems by adjustable speed drives, electronically ballasted lightening and the power supplies

of every computer, copier and fax machine and much of the tele-comunication equipment used in modern offices.

The widespread and growing adoption of these technologies has greatly increased the flow of harmonic current on

facility distribution system and has given rise to a host of related problems, including overheated transformers, motors,

and neutral wires, nuisance breaker trips, voltage distortion, which can cause sensitive electronic equipment to

malfunction or fail and elevated neutral - to - ground voltage, which can cause local area networks to malfunction.

Geetech Harmonic Power Savers have the stability to attenuate harmonic currents and thus alleviate these type of

power quality problems. In addition, by canceling certain harmonic currents, Geetech Harmonic Power Saver can

reduce the energy losses that harmonics would otherwise cause in conventional transformers. Given the right

conditions, these energy savings can offset the premium price for Geetech Harmonic Power Savers and yield

an attractive payback period